Product
ProductCurrent position > Product detail

DN50 steam flowmeter

『DN50 steam flowmeter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

1. Selection specifications of steam flow meter

The selection specifications of steam flow meter should consider the following points: diameter: DN25: suitable for liquid flow range of 1-10m3/h to 60m3/h, gas flow range of 25m3/h to 60m3/h. DN32 and DN40: The flow range varies depending on the type of liquid and gas. DN50 to DN200: The flow range gradually expands to accommodate a wider range of liquid and gas flow rates. DN300 and above: It is recommended to use a plug-in flowmeter. Temperature and pressure compensation function: N: No compensation function. Y: There is a compensation function. Output model: F1: Two wire system 420mA. F2: Three wire system 420mA. F3: RS485 communication interface. Type of tested medium: J1: liquid. J2: Gas. J3: Steam. Connection method: L1: flange clamp type. L2: Faqingju permeable orchid connected sparrow spine. Function options: Accuracy: E

1, E2. Temperature: T

1. T

2. T3. Pressure rating: P1 to P3. Power supply methods: D1 and D2. Materials: B1 and B2. When selecting, the above specifications should be comprehensively considered based on specific measurement requirements, working environment, budget, and other factors to ensure that the selected steam flowmeter can meet actual usage requirements.

2. What is the maximum flow rate of the steam vortex flowmeter DN50 with a pressure of 6 kilograms?

The liquid of the DN50 vortex flowmeter is modified to 4-55 cubic meters per hour, and the gas is 35-350 cubic meters per hour.

. What is the maximum flow rate of DN50 steam turbine flowmeter? TK-WJL vortex flowmeter has a liquid flow rate of 4-55 cubic meters per hour and a gas flow rate of 35-350 cubic meters per hour. What is the minimum flow
DN50 steam flowmeter
rate of DN50 turbine steam flowmeter? I have never heard of turbine flowmeters being able to measure steam. Turbine flowmeters are divided into gas turbine flowmeters and liquid turbine flowmeters. Vortex flow meters can measure steam, and the lower limit flow rate of flow meters for measuring steam and gas is generally related to the density of the medium. The higher the density of the medium, the lower the measurement limit value. When the density is low, the minimum flow rate that can be measured by the DN50 vortex flowmeter is generally around 30 cubic meters per hour. When the density is high, the minimum flow rate that can be measured can reach more than 20 cubic meters per hour. ~~~~Professional manufacturer of flow meters, welcome to explore! ~~~~~~~

5. How much does a thermal mass flowmeter cost?

6. Parameters of Annubar flowmeter

The specifications of Annubar flowmeter include plug-in design from DN50 to DN5000 millimeters, as well as specifications from DN500 to DN5000 millimeters.. Its measurement accuracy can reach ± 0.5% and ± 0.2%, with a repeatability of ± 0.1%. In terms of flow range, the range of volumetric flow is 10:

1, 100:1, and the range of mass flow is 8:1. In terms of work pressure, the maximum pressure limit for the uniform speed tube type without a function is 29.00MPa, while the limit for the movable type is 10MPa. The Anuba flowmeter is suitable for fluids with a temperature not exceeding 450 ℃, and the medium viscosity must be below 30CP (equivalent to heavy oil). Sensors and three valve collapse control groups are mainly made of materials such as 316L stainless steel, alloy steel, Hastelloy, and Monel, and flange materials are also available in various opti

『SILVER Official Website SERVICE』

Copyright2026SILVER E-Commerce
[email protected]
+86 15365082610