Current position > News detail
『Fluke Flow Meter Sourcing: Finding High-Quality HVAC Diagnostics Equipment and Anemometers』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
Fluke Flow Meter Sourcing: Finding High-Quality HVAC Diagnostics Equipment and Anemometers
Quick Answer: Fluke handheld diagnostic tools and anemometers work well for spot checks in HVAC service. For inline chilled water, cooling water, compressed air or gas measurement, Silver Automation Instruments supplies electromagnetic and thermal mass flow meters with 4-20 mA HART, RS485 and pulse outputs. Send your pipe diameter, flow range, temperature and pressure for a specific model and price.
When buyers search for Fluke flow meter sourcing, they often need two different tool types. One type is the handheld HVAC diagnostic meter. The other type is an inline flow meter for water or air pipework.
Where Fluke Tools Fit in HVAC Work
Fluke meters show up on many HVAC job sites. Technicians carry Fluke 922 air flow meters or Fluke 971 temperature humidity meters for duct readings. These tools handle air velocity in m/s, differential pressure in Pa, temperature and relative humidity. They are fast. They fit in a service bag. But they are not inline process meters. A handheld anemometer reads air speed at a point. It does not give a continuous 4-20 mA signal to a BMS or PLC.
What Changes When You Need Permanent Flow Data
Facilities teams in Southeast Asia often need flow data logged every second. A shopping mall in Manila or a food plant in Surabaya may balance chilled water loops across AHUs. Handheld tools cannot stay in the pipe. Here is the thing. Inline flow meters install directly in DN15 to DN300 pipe and send data nonstop. Silver Instruments offers electromagnetic flow meters for conductive water and thermal mass flow meters for air and gas.
Electromagnetic Flow Meters for Chilled Water and Cooling Water
Silver Automation Instruments supplies electromagnetic flow meters from DN15 to DN600. They fit PN16 or PN40 flanges and work with water conductivity above 5 µS/cm. Typical HVAC water conductivity is 200 to 800 µS/cm, so this is not a problem. Accuracy is 0.5% of reading for flows from 0.3 to 10 m/s. Outputs include 4-20 mA HART, RS485 Modbus RTU, and pulse. A PT100 temperature element can be included for heat measurement in kcal or BTU. For cooling tower water in the Gulf region, we recommend rubber liner and titanium electrodes. For chilled water at 2 to 12 °C, PTFE liner and 316L electrodes are enough.
Thermal Mass Flow Meters for Compressed Air and Ventilation Air
Not every HVAC flow issue is water. Compressed air audits need direct mass flow
A Real Example from a Customer Site
Last year a contractor in Vietnam asked us for a DN100 cooling water flow meter. The pipe ran between a chiller and a thermal storage tank. He needed 4-20 mA HART to a Siemens PLC. We supplied an electromagnetic flow meter with PTFE liner, 316L electrodes, IP67 housing and local display. Flow range was 10 to 120 m³/h. The meter shipped from stock in 7 days. It worked at 4 bar and 8 to 15 °C. That is the level of detail that gets a quote right the first time.
What to Send for a Quote
Do not send a vague request for a flow meter price. Send this instead: medium, pipe size in DN, flow range in m³/h or kg/h, pressure in bar, temperature in °C, output signal and power supply. If the application is HVAC water balancing, include the number of lines and whether you need heat metering. For compressed air, include the line pressure and whether the pipe is carbon steel or stainless. Contact Silver Instruments directly for a quote.
Tel: +86-25-68650347
WhatsApp: +86-25-52155837
WeChat: +86 15365082610
FAQ
Does Fluke make inline process flow meters for chilled water?
Fluke offers handheld diagnostic tools and anemometers. For inline chilled water flow measurement, Silver Instruments supplies electromagnetic flow meters.
Which flow meter is best for HVAC cooling water?
An electromagnetic flow meter with 4-20 mA HART is a common choice for DN25 to DN300 cooling water lines. It works with water conductivity above 5 µS/cm.
Can a thermal mass flow meter measure HVAC compressed air?
Yes. Thermal mass flow meters measure kg/h or Nm³/h directly. They work well for compressed air audits and permanent monitoring.
What accuracy can I expect from Silver Instruments electromagnetic flow meters?
Standard accuracy is 0.5% of reading. Some models offer 0.2% with onsite calibration.
Do Silver Instruments flow meters work with BMS and PLC systems?
Yes. Outputs include 4-20 mA HART, RS485 Modbus RTU, and pulse. Most BMS, PLC and SCADA systems accept these signals.